Question: Where does the heavy weight go on a grandfather clock?

What do the 3 weights on a grandfather clock do?

The three weights provide power to the hour strike (left weight), time (center weight), and chime melody (right weight). Without these weights, the Grandfather Clock would not operate. Each weight is different and must be properly hung from the movement (left, center, right) to ensure proper operation.

Should the weights on a grandfather clock drop evenly?

Yes, the order is critical for proper function. On 99% of floor clocks (grandfather/grandmother) with three weights, the heavier weight goes on the right-hand chain hook or pulley as you are FACING the clock.

Why does my pendulum stop swinging?

Often a pendulum clock will stop when it has been moved, bumped or even a too aggressive push to restart a pendulum. It is not broken, only out of beat. This only takes a few minutes to readjust and all pendulum clock owners should learn how as this will happen eventually.

What causes a pendulum to eventually slow down and stop swinging?

When the swing is raised and released, it will move freely back and forth due to the force of gravity on it. The swing continues moving back and forth without any extra outside help until friction (between the air and the swing and between the chains and the attachment points) slows it down and eventually stops it.

IT IS AMAZING:  How do you reset a lacrosse atomic wall clock?

Why did my grandfather clock stop chiming?

If your clock has stopped chiming after 5 years, or has stopped chiming correctly, chances are the problem is a lack of, or improper, maintenance. Most manufacturers of clocks recommend ‘oiling’ a clock every year. … The clock often stops functioning properly due to this lack of lubrication or from the worn parts.

How do I reset the weights on my grandfather clock?

A clock can be overwound, resulting in the weights being stuck in the highest position. When this happens, gently move the minute hand past the quarter hour and listen for the chime. This should release the weight. When winding, be sure you can see the top of the weight and then stop to avoid overwinding.

How do I identify my grandfather clock?

Find the manufacturer of a grandfather clock by examining both the clock itself and the movement inside. Look on the dial, or face, of the grandfather clock. In most cases, the name of the manufacturer of the case and dial is painted or engraved on the clock face.

How much would it cost to move a grandfather clock?

Typically, it will cost between $300-$1,300 or more to ship your grandfather clock using peer-to-peer shipping services, depending on the size, age, and value of your clock and whether you need any additional services, such as packing or loading.

Why do clocks have 2 weights?

The middle weight regulates the time, the left weight (as your looking at the clock) regulates the strike and the right weight (as your looking at the clock) regulates the chimes. The middle and left weights are generally the same weight.

IT IS AMAZING:  Can you stop a clock?

How much do the weights weigh on a grandfather clock?

If the movement is square and chain driven, it will require 2@4.7 lbs and 1@6.6 lbs. These are available in either 47mm or 43mm diameters. If the pendulum bob is 8 1/2 inches or more, change that rule to 2@6.6 lbs and 1@4.7 in 47mm or 43mm.

How do you manually lower weights on a grandfather clock?

Using cloth gloves, or at least a cloth of some kind, pull down on the weight some. This is the same as making the weight weigh more. At the same time, turn the minute hand past the quarter hour to see if it will engage the chime. When you advance the time and make it chime, the weight will slowly come down.

How long does a grandfather clock last?

Most quality new grandfather clocks will run about 20+ year if you set one up and never maintain it, but oiling every few years may make the clock last a lifetime (or two).