How do you sync the chimes on a Seth Thomas mantle clock?
Insert the key into the left hole and wind to set the chimes to sound on the hour. Turn the key until it can be no longer be wound. Place the key in the center hole to adjust the time on the clock face. Turn the key counterclockwise, while looking at the front of the clock to set the time.
How do you set a Seth Thomas clock?
On the Dial
Decide whether the clock is running fast or slow. Insert a square key into the slot below the center of the dial on the clock face. Turn the key clockwise to slow down the clock; counterclockwise to increase its speed. Continue to check and adjust the clock for six days.
How do I turn off the chime on my mantle clock?
Look for a lever or setting called “Chime Silent” or similar. The setting may be on the clock face and not near other controls. If you’d like to shut down the Westminster or other chimes, select the “Silent” option.
What causes a pendulum to slow down and stop swinging?
When the swing is raised and released, it will move freely back and forth due to the force of gravity on it. The swing continues moving back and forth without any extra outside help until friction (between the air and the swing and between the chains and the attachment points) slows it down and eventually stops it.
Why does my clock chime wrong?
The usually happens when an hour hand is moved by mistake when re-setting the time on your grandfather clock. Sometimes if a grandfather clock is allowed to wind down so the weights are on the bottom and the grandfather clock pendulum stops, this can happen.
Why does my clock not chime?
If your clock has stopped chiming after 5 years, or has stopped chiming correctly, chances are the problem is a lack of, or improper, maintenance. Most manufacturers of clocks recommend ‘oiling’ a clock every year. … The clock often stops functioning properly due to this lack of lubrication or from the worn parts.
Can you Overwind a clock?
What is overwinding? It’s actually impossible to overwind a clock, whilst you can wind a clock until it cases internal damages and breakages, it’s impossible to continuously wind a clock. … However, in many cases it may be difficult to spot when your clock needs an oiling.
What does F and S mean on a clock?
There is usually a small F (Faster) and S (Slower) printed on either side of the dial. French clocks may have an R (Retard) and A (Advance). To make the clock go faster, turn the key toward the F (or A). To make the clock go slower, turn the key toward the S (or R).
Why does my clock run fast?
Fixing a clock that runs too fast can be as easy as turning a screw. Clocks with an interior or exterior pendulum have adjustment screws either on the pendulum or through a hole in the top of the clock. It may take up to two weeks to properly set a clock that runs fast.
How do I know if my clock is valuable?
Examine the clock for the marker’s signature or label. Check the face, mechanism and case. Clocks that are labeled or stamped with the name of its maker or a trademark are more desirable than unmarked clocks. If you can’t find a label or a stamp, you’ll need to identify the type of clock yourself.
How do I tell how old my Seth Thomas clock is?
Between 1881 and 1918, most Seth Thomas clocks were stamped in ink with codes on the bottom or on the case back. Note that many Seth Thomas clocks were reverse date stamped with the year and then a letter for the month of production.